PRODUCT CENTER
Metal packaging sealing systems and components
Compare sealing materials, foam-in-place compounds, production equipment and packaging components for metal pail and drum lids. Follow the product families below to review options for your lid design and filled product.
02 EQUIPMENT
Matched machines for each sealing process
Compare process, curing method and project inputs on the sealing equipment overview.
EVA automatic gasket lining machine
Pre-formed strip feeding, groove insertion, hot-knife cutting and heat-welded joining.
PVC one-component dispensing machine
Automatic PVC bead dispensing followed by controlled oven curing.
PU two-component dispensing machine
Precision metering, dynamic mixing and 3-axis path control for room-temperature FIP gaskets.
03 PACKAGING COMPONENTS
Accessories, closures, square lids and round lids
Find clamps, handles, closures, lids and ends by function, then confirm component dimensions and assembly fit against your container drawing.
Steel drum hoop clamps
Steel hoop and clamp variants for 20L, 20-50L and 200L drums.
Handles, welding lugs and plates
Metal, plastic and rubber-grip handles with matching welding lugs and plates.
Screw nozzles, caps and liners
Complete 18, 30, 32, 42, 47, 55 and 70 mm threaded closure component range.
Pull caps, finger press caps and seals
32, 42 and 60 mm pull/press closure systems with necks, seals, inner caps and pull tongues.
Square lids, ends and closure assemblies
500 ml, 1L, 4L and 18L square lid and end variants from the catalog.
Round lids, rings and ends
Round lid families and custom profiles covering model sizes 99 through 284.
SEALING SYSTEM SELECTION
Choose the material and production route together
Start with the filled product, lid groove and closing method. Then compare the supply form and production process before requesting a sample.
| Sealing route | Supply and process | Confirm before approval | Explore the matching range |
|---|---|---|---|
| Pre-cut EVA rings | Joined rings for direct insertion into the lid groove, sample trials and manual assembly. | Ring dimensions, joint fit, compression and compatibility with the actual filled product. | Manual EVA rings · Compare EVA grades |
| EVA roll stock | Continuous profiled strip for automatic feeding, groove insertion, cutting and heat-welded joining. | Strip profile, material grade, winding requirements and a trial on the intended lining machine. | EVA roll stock · EVA lining machine |
| NR, EPDM or silicone rings | Pre-formed rubber gaskets selected by medium, service conditions and custom section. | Compound-specific temperature and media suitability, groove fit and sample sealing tests. | Compare rubber materials |
| 1K PVC foam-in-place | Premixed compound dispensed into the groove, followed by controlled oven curing. | Lid coating, bead dimensions, dispensing conditions, oven process and filled-product tests. | PVC compound · PVC dispensing machine |
| 2K PU foam-in-place | Two components metered, mixed and dispensed to form a gasket by room-temperature reaction. | Component handling, metering and mixing, bead path, adhesion and finished-gasket performance. | PU compound · PU dispensing machine |
Use technical sheets for initial comparison; final selection requires the actual lid, closing process and filled medium. For food-contact projects, confirm the destination requirements and applicable documentation before approval.
ENGINEERING SUPPORT
Send the lid drawing, groove dimensions and filled medium.
We will match material, section, compound or component and confirm the applicable TDS, MSDS and sample plan.


